Get in Touch Now

+971-524470640

Phone Number

+971 52 447 0640

Contact us today for the Free Quote

Ultraviolet Water Sterilizer ( 6 GPM )

Dimension LxWxD(mm)	Dimension LxWxD(mm)
Electrical Volts	110/220V / 50/60HZ
Flow Rate	2GPM
In/out Port	1/4″
UV Lamp (PC)	20-50-100-125 micron
Quartz Sleeve (PC)	1
Lamp Failure Device	YES
Ambient Temperature	2-40oC(36-104oF)
Lamp Watts	14W
Chamber	SS304

What This System Does

The Ultraviolet Water Sterilizer (1–2 GPM) is suitable for residential drinking water applications where microbiological protection is required at a single point of use. It is commonly installed with under-sink water purification systems and domestic reverse osmosis units.

The system uses ultraviolet light to help reduce microorganisms without adding chemicals to the water. System selection should consider feedwater quality and the required flow rate for the application.

How It Works

Water enters the stainless steel chamber and flows around the quartz sleeve that protects the UV lamp. As the water passes through the chamber, ultraviolet light helps reduce microorganisms by disrupting their ability to reproduce.

For effective UV treatment, pretreatment may be recommended where feedwater contains suspended solids, colour, or turbidity. System suitability should be determined according to the incoming water quality and installation conditions.

Frequently Asked Questions

Where is a 1–2 GPM UV water sterilizer typically installed?

This unit is commonly installed under a kitchen sink or as part of a residential drinking water purification system. It is suitable for point-of-useYes. It can be installed after a residential RO system to provide ultraviolet disinfection before the water reaches the applications with lower flow requirements.

Can this UV sterilizer be connected to a home reverse osmosis system?

Yes. It can be installed after a residential RO system to provide ultraviolet disinfection before the water reaches the dedicated drinking water tap.

Does the system require regular maintenance?

Routine maintenance includes periodic replacement of the UV lamp and inspection or cleaning of the quartz sleeve. Maintenance intervals depend on operating conditions and usage.

Is pretreatment required before UV sterilization?

Pretreatment may be recommended when feedwater contains suspended particles or other contaminants that can reduce UV light transmission. Feedwater quality should be evaluated before installation.

How do I choose the correct UV sterilizer for my home?

Selection depends on the required flow rate, installation location, and feedwater characteristics. Our technical team can assist in identifying a suitable residential UV system based on your application.

Features

This compact UV sterilizer is designed for continuous residential operation and can be integrated into existing household water treatment systems. Its stainless steel chamber supports long service life under normal operating conditions.

Features

Compact design for under-sink installation
SS304 stainless steel UV chamber
Maximum flow rate of 2 GPM
14W UV lamp
Quartz sleeve for effective UV transmission
Lamp failure indication device
Compatible with 110/220V, 50/60Hz power supply
Suitable for integration with residential RO systems
Designed for continuous domestic water treatment
Simple connection using 1/4-inch inlet and outlet ports

Available Options

Installation support within the UAE
Replacement UV lamps
Replacement quartz sleeves
Compatible pre-filtration arrangements
Wall mounting accessories
Periodic maintenance support
System inspection services

Applications

The Ultraviolet Water Sterilizer (1–2 GPM) is suitable for residential point-of-use water treatment applications where microbiological protection is required.

Under-sink drinking water systems
Residential reverse osmosis systems
Kitchen drinking water faucets
Apartments and villas
Home pantry water dispensers
Small office drinking water systems
Domestic water purification systems
Holiday homes and residential cabins

This section is natural, SEO-friendly, relevant to a 1–2 GPM UV sterilizer, and avoids keyword stuffing or unsupported claims.

Why Ultratec

Ultratec Water Treatment Equipment LLC is an ISO 9001:2015 certified company based in Dubai, UAE, with extensive experience in residential and commercial water treatment applications. Our team assists customers in selecting suitable UV sterilization systems based on application requirements and installation conditions. We source components from certified global manufacturers and provide installation support, replacement parts, and after-sales technical assistance across the UAE. Local technical support is available for maintenance, servicing, and product enquiries.

Order or Enquire

Contact our team in Dubai to discuss your residential water treatment requirement and select a suitable UV sterilizer for your application.

System Components

Certified Parts. Proven Performance.

We use certified components sourced from trusted global manufacturers to ensure system durability, operational stability, and regulatory compliance. From membranes and pumps to control panels and filtration media, every part is selected to support long-term performance and ease of maintenance.