Get in Touch Now

+971-524470640

Phone Number

+971 52 447 0640

Contact us today for the Free Quote

EVO Pure 50 GPD RO System W/ Plastic Body

The EVO PURE Reverse osmosis Systems with Booster Pumps are traditional in design with Good Quality filter housings and a pressure tank. Complete system includes: Reverse osmosis/Activated Carbon purification assembly; 3.2 gallon pressure tank; long reach, non air-gap faucet; automatic shut-off, USA-220 booster pump and installation parts kit. optional ECF (Extended Contact Carbon Adsorption Filter) also available. Chlorinated water – Carbon pre-filtration required for all models when chlorinated water is used.

Description

1st Stage-Polypropylene filter
High-Grade 1 micron high-capacity polypropylene sediment filter
-remove larger particles & suspended matter such as dirt, silt, rust, sand from water.
-Protects and extends the life of the membrane and system
-Recommend replace every 6 months, varies depend on the water source quality
-Standard Size 2-1/3″ x 10″

2nd Stage-GAC Activated Carbon

Remove of deep-seated particulate impurities, sludge, rust other suspended matter, color adsorption, odor, pesticides, detergents and other organic pollutants and tap water adding bleach to regulate taste, water mellowness, sweet, so water closer to nature. Recommend replace every 6 months, varies depend on the water source quality Standard Size 2-3/4″ x 10-1/4″

3rd Stage-CTO Coconut Shell Carbon Block Filter

Forceful remove pesticide residues in water, water pollution odor of ozone, chlorine removal of residual heavy metals, bacteria, sterilization rate if 99% Recommend replace every 16 months, varies depend on the water source quality Standard Size 2-3/4″ x 10″

4th Stage-Reverse Osmosis Membrane

RO membrane pore size is the hair of five millionths(0.001 microns) it can effectively remove calcium and magnesium, bacteria, organic, inorganic, metal ions and radioactive substances. Recommend replace every 4 years, varies depend on the water source quality Standard Size 2-1/5″ x 11-4/5 “

5th Stage-Inline GAC Coconut Shell Carbon Filter

T33 GAC Coconut Shell Carbon Filter removes any taste or odor the water may have picked up while sitting in the tank and For a sweeter taste for the water and Recommend replace every 2 years, varies depend on the water source quality Standard Size 2-1/3″ x 9-4/5″,

Water Storage Tank

3.2 Gallon Tank Work pressure: less than 0.4MPa Pressure
Max:1.3MPa Flow:larger than 3L/min Dimension:15″ x 10″ NSF approved

What the system is and what problem it solves?

The EVO Pure 50 GPD RO System is a compact point-of-use purification unit designed to provide clean, low-TDS drinking water for homes, small offices, and light commercial settings. Built with a lightweight plastic body and reinforced with a booster pump, it offers stable performance in areas with low feed-water pressure.

The five-stage configuration removes sediments, chlorine, dissolved solids, organic contaminants, and taste- or odor-causing compounds. With its included storage tank and standard faucet assembly, the system is suitable for installations requiring consistent purified water output at the tap.

Process Design & Operating Philosophy

Feed water flows through three stages of pre-filtration to remove particulates, chlorine, organics, and residual chemical compounds before entering the RO membrane. The 50 GPD membrane provides molecular-level purification, targeting dissolved ions, microorganisms, and inorganic impurities.

A final polishing stage improves taste and odor before dispensing. The booster pump stabilizes RO pressure, ensuring consistent permeate quality even under low-pressure supply conditions.

Design Basis & Engineering Assumptions

Parameter	Design Basis
Nominal Capacity	50 GPD membrane
System Output	Dependent on tank storage + usage pattern
Filtration Stages	5 stages (sediment, GAC, carbon block, RO, post-carbon)
Design Temperature	25°C
Operating Pressure	Supported by USA-220 booster pump
System Type	Under-sink RO with storage tank

Final output varies with feed pressure, temperature, and inlet water quality.

System Configuration

The EVO Pure 50 GPD system includes:

1st Stage – Polypropylene Sediment Filter (1 micron)

Removes sand, rust, silt, and suspended particulates
Protects downstream carbon filters and membrane
Recommended replacement: 6 months

2nd Stage – GAC Activated Carbon

Adsorbs chlorine, chemical residues, pesticides, odors, and organics
Improves taste and protects RO membrane from oxidation
Recommended replacement: 6 months

3rd Stage – CTO Coconut Shell Carbon Block

Removes remaining chlorine, heavy metals, and chemical traces
Provides deeper filtration than granular carbon
Recommended replacement: 16 months

4th Stage – Reverse Osmosis Membrane (50 GPD)

Pore size: 0.001 microns
Removes dissolved solids, metals, bacteria, viruses, inorganic/organic compounds
Recommended replacement: 4 years

5th Stage – Inline T33 GAC Coconut Shell Carbon Filter

Final polishing for improved taste and odor
Recommended replacement: 2 years

Storage Tank

3.2 gallon capacity
Work pressure < 0.4 MPa
NSF-approved design

Additional components included:

USA-220 booster pump
Automatic shut-off valve
Long-reach faucet
Installation hardware kit

Performance Parameters

Parameter	Parameter
Membrane Capacity	50 GPD
Overall System Output	Determined by pressure, temperature, and tank cycle
Contaminant Reduction	Sediments, chlorine, chemicals, TDS, heavy metals, microorganisms
Monitoring	Filter replacement intervals, feed pressure, tank fill rate

Performance depends on water quality and pressure conditions.

Pretreatment & Integration Requirements

Pretreatment may include:

Carbon filtration required for chlorinated municipal water
Sediment control for turbid sources
Regular filter replacement as per schedule
Adequate feed pressure (supported by booster pump)

Optional post-treatment enhancements include UV sterilization or remineralization.

Models

Brackish Water RO – Modular Product Range

Model Number	Permeate Flow (GPD)	Notes
EVO-PURE-50	50	Plastic-body 5-stage RO system with tank

Note: Custom configurations based on feedwater quality are available.

Features

Standard Features:

Five-stage under-sink RO system
1-micron sediment and dual-carbon pre-filtration
50 GPD RO membrane
Inline post-carbon taste-improvement filter
USA-220 booster pump
Automatic shut-off valve
3.2-gallon NSF-approved storage tank
Plastic-body housing for compact installation
Complete installation kit

Available Options:

Extended Contact Carbon Filter (ECF)
UV sterilization
Alkaline or remineralization filter
Additional sediment pre-filter
Leak protection
Larger storage tank

Applications

Residential drinking water systems
Apartments and small villas
Offices and staff areas
Cafés and small food-service locations
Areas with low water pressure
Locations requiring improved taste and odor control

System Components

Certified Parts. Proven Performance.

We use certified components sourced from trusted global manufacturers to ensure system durability, operational stability, and regulatory compliance. From membranes and pumps to control panels and filtration media, every part is selected to support long-term performance and ease of maintenance.