Water Quality Taster and Monitors

Myron L Ultrameter II

Measures: pH, ORP, TDS, Resistivity, Conductivity, Temperature and Calculates Free Chlorine
Easy to Calibrate
Advanced Features
3 solution standards for greatest accuracy in diverse applications
Fully automatic temperature compensation
User adjustable temperature compensation (up to 9.99%°C)
which also allows TC to be disabled for applications requiring non-compensated readings.
User adjustable conductivity/TDS conversion ratio for greater accuracy when measuring solutions
not contained in the microprocessor.
Auto-shut-off maximizes the life of the single 9V battery to more than 100 hours/5000 tests.
Non-volatile microprocessor provides data back-up, even when the battery is changed.

Inline Digital TDS Meter

Now Check instantly your water purifier water Quality at your own with most reliable inline HM Digital TDS meter
Features:
Displays TDS levels of the Feed Water and Product Water with in & out electrode probes
Factory calibrated and highly efficient and accurate (±2%)
due to its advanced microprocessor technology
Dual Range – Measures from 0 – 999ppm,
with a resolution of 1ppm. From 1,000 to 9,990ppm,
the resolution is in 10ppm increments,
indicated by a blinking x10 image
Extra large, easy-to-read LCD display in a water resistant casing
Comes equipped with 1/4 inch
John Guest Quick-Connect T-fittings as shown
Uses 2 AAA batteries (included)
with a battery life of over 1,000 hours of continuous use
Size: 11.6 x 6.8 x1.8 cm

Automatic flushing control

(pH-mV-Cond-TDS-Salt-Temp) Meter

Features:

Microprocessor based designed.
Large LCD displays readings and temperature simultaneously.
Rugged design with waterproof housing. It floats on water.
Measuring 5 parameters: pH, Conductivity, TDS, Salinity, and temperature by just on combo electrode.
Automatic Temperature Compensation (ATC). °C or °F are switch able.
Memory function stores and recalls up to 150 points. MAX/MIN and data Lock.
Simple to calibrate by one keyboard for 5 points buffer.
Indicate percentage of slope (PTS) after calibration
Auto power shut off after 10 minutes of non use.
Easy replaced electrode module.

Free and Total Chlorine pH and mV Meter

Features:

Microprocessor based designed.
Large LCD displays readings and temperature simultaneously.
Rugged design with waterproof housing. It floats on water.
Measuring 5 parameters: pH, Conductivity, TDS, Salinity, and temperature by just on combo electrode.
Automatic Temperature Compensation (ATC). °C or °F are switch able.
Memory function stores and recalls up to 150 points. MAX/MIN and data Lock.
Simple to calibrate by one keyboard for 5 points buffer.
Indicate percentage of slope (PTS) after calibration
Auto power shut off after 10 minutes of non use.
Easy replaced electrode module.

Get a Quotation Now!

Questions and Answers

What types of water quality meters and monitors do you offer?

We supply TDS meters, pH meters, conductivity meters, chlorine meters, multiparameter testers, inline monitors, and RO monitoring controllers for commercial and industrial applications.

What parameters can these instruments measure?

Depending on the model, instruments can measure pH, TDS, conductivity, salinity, ORP, resistivity, temperature, and chlorine levels.

Are these meters suitable for reverse osmosis systems?

Yes. Many of these instruments are commonly used for monitoring feedwater, permeate quality, and overall RO system performance.

What is the difference between a handheld meter and an inline monitor?

Handheld meters are used for portable spot testing, while inline monitors provide continuous monitoring within a water treatment system.

Can these meters be used for industrial water treatment applications?

Yes. Many models are suitable for industrial process water, cooling towers, RO plants, laboratories, and commercial water treatment systems.

Are these instruments suitable for drinking water testing?

Yes. Selected models can be used to monitor drinking water quality parameters such as TDS, conductivity, pH, and chlorine levels.

Do these meters require calibration?

Most water quality meters require periodic calibration to maintain measurement accuracy. Calibration procedures vary by model.

Are calibration solutions available?

Yes. Compatible calibration solutions and testing accessories are available for many instruments.

Can I use a TDS meter to check RO water quality?

Yes. TDS meters are commonly used to compare feedwater and purified water quality in reverse osmosis systems.

What is the benefit of a multiparameter water quality meter?

A multiparameter meter allows multiple water quality measurements from a single instrument, reducing testing time and improving efficiency.

What is an automatic flushing controller used for?

Automatic flushing controllers help reduce membrane fouling and scaling by periodically flushing RO membranes during operation.

Can these instruments be used in laboratories?

Yes. Many water quality meters are suitable for laboratory testing, research, educational facilities, and quality control applications.

Are replacement electrodes and accessories available?

Yes. Replacement electrodes, probes, reagents, batteries, and other compatible accessories are available for selected models.

Do you provide technical support for water quality instruments?

Yes. Our team can assist with product selection, operation guidance, and compatible consumables.

How do I choose the right water quality meter?

The correct instrument depends on the parameters you need to measure, testing frequency, accuracy requirements, and application type.

Can these meters be used for swimming pools and cooling towers?

Yes. Selected instruments can be used for monitoring water quality in swimming pools, cooling towers, and water treatment systems.

Are the monitors suitable for continuous operation?

Inline monitors and controllers are designed for continuous monitoring applications when installed correctly.

Do you supply water quality testing equipment across UAE?

Yes. Ultratec supplies water quality testers, monitors, and related accessories throughout Dubai, Abu Dhabi, Sharjah, and across the UAE.

Are consumables and reagent kits available?

Yes. Consumables including calibration solutions, reagent strips, probes, and replacement accessories are available for supported products.

How can I request a quotation or product recommendation?

Contact our team with your application details and required parameters. We will recommend a suitable testing instrument for your water quality monitoring needs.